Login    Sites MenuBlueStep
Kiosk 1100 Help
Outline full outline 
LiftAmerica Conversion 
Downloads 
Enrollment/Assessment 
Kiosk Use Guide 
Login Guide 
Troubleshooting 
Power and Connection 
Registration 
Authentication 
Assessments 
Tanita Error Messages 
Resetting the Tanita 
Troubleshooting Table 
Quick Access 
Support 

Remote Mode

The Tanita Body Composition Analyzer 'Remote On' mode setting enables the kiosk to record information in the LiftAmerica database. The Tanita was shipped to you set with the remote mode turned on and ready to connect and use. However, during installation or if usage instructions are not followed, the Tanita may need to have the mode reset to 'On'.

When remote mode is on and correctly set, the Tanita screen will display only an 'r S' in the window, as shown below.

If the Tanita does not show 'r S' in the window, is not performing as described in the use instructions or is not recording data in the student's record, reset the remote mode to 'On' following the steps outlined below, using the button pad, shown below.

< Switch the Tanita unit off using the ON | OFF button.

< Press the ON | OFF and ZERO | RESET buttons simultaneously.

< Switch the remote mode on by pressing the up p or down q arrow until ON appears in the Tanita window.

< Press the Set button to confirm that remote mode is on. Check that the Tanita screen reads 'r S', as shown in the first
     illustration.